How To Use

STEP 1:

Prep/Wash is Key to the Best results! Wash area well with your choice of detailing products. DO NOT use any cleaning product that might have Wax or Ceramic infused.

STEP 2:

Wipe area with your choice of Wax and Grease Remover until the towel being used is wiping clean. 

Using a Clay Bar can be an optional step.

Make sure the area is dry before moving on. 

STEP 3:

Shake bottle well before opening.

Apply evenly across applicator making sure edges are wet.

Be sure to use enough to keep applicator saturated throughout application. Start at the top of the panel to allow excess product to drip down the panel.

Use light even pressure to glide across the panel with a 30-50% overlapping pass to ensure no spots are missed.

There is a 1-2 minute working window to go back and fix any spots that are missed with application. After the 1-2 minute window has passed DO NOT go back over any spots. Failing to follow these instructions will lead to streaks, haziness, etc.

REMEDI needs a FULL 24 hours of time for the curing process to be complete. 


OPTIONAL BUT RECOMMENDED: After STEP 1, lightly scuff the surface with 3k or 4k finishing sand paper, this will ensure there is no ceramic on the panel. (Ceramic/Wax will not let the coating stick to the surface) OR using a polishing pad with your choice of Compound, do a quick pass over the panel to ensure surface is fully decontaminated for the best results!